OIL DRAIN PLUG PROBLEMS?

With Fumoto Valve say goodbye to stripped plug threads and messy oil changes.
With a Fumoto Oil Drain Valve, draining oil becomes a one touch operation. You simply have to remove the original oil drain plug and screw the QWIK Valve. Once you have done that everything is set, the five-minute installation is completed and you can start draining your oil with the touch of one finger. To open the valve, you have to lift up the lever to unlock it and then give it a quarter turn, counter-clockwise. Once you drained the oil, you close the valve by simply turning the lever clockwise until it fits in its original position, locked and double sealed to prevent any kind of leakage. It’s just that simple. You won’t need tools and you will be able to avoid contact with hot oil.

Sizes to fit all cars, trucks, vans & RVs
Fumoto valves come in two types: the first has a flat end from where the oil drains, and the second type (S & N-Type Valve) has a nipple, a connector, where you can optionally adhere a hose – this way you avoid any possibility of oil spillage. Both of these models eliminate the hassle in oil draining and prevent oil from getting all over your hands and driveway each time you need to change your vehicle’s oil.

Besides reducing oil changing time and costs, using a Fumoto valve eliminates the concern about stripped thread repair. The Fumoto valve is made from forged corrosion-resistant brass and stainless steel so you can expect it to outlast your engine!

The Fumoto valves have the endorsement of six of Japan’s leading car manufacturers: Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. It has been tested and granted by these manufacturers “Genuine parts” status and, in the U.S., they are already being installed at the factory level in some of the vehicles made by Ford and Toyota, among others. The Fumoto Oil Drain Valve is revolutionizing vehicle servicing!

What if you have stripped oil pan threads already? Here's Cost-Saving Solution
Re-tap your current stripped oil pan threads to the next largest thread size and install the corresponding Fumoto Valve. For example, if your original thread size is 12mm-1.25, re-tap it to the size 14mm-1.5 and use the Fumoto Valve Model No. F-106. Use *our size chart to find a right size for you. You can hire a mechanic do this for you, or you can do it yourself if you have the right tools and skills. Once the Fumoto Valve is installed, while you are enjoying quick and mess-free oil changes, you will never have the problem of stripping the oil pan threads again!

Granted "Genuine Parts" status by: